SN754410
Quadruple half-H driver
PDF datasheet
| | | |
1,2EN | 1 • | 16 | VCC1 |
1A | 2 | 15 | 4A |
1Y | 3 | 14 | 4Y |
GND | 4 | 13 | GND |
GND | 5 | 12 | GND |
2Y | 6 | 11 | 3Y |
2A | 7 | 10 | 3A |
VCC2 | 8 | 9 | 3,4EN |
| | | |
Pin | Symbol | Description |
---|
1 | 1,2EN | enable (drivers 1 and 2) |
2 | 1A | input 1 |
3 | 1Y | driver 1 output |
4 | GND | ground (heat sink) |
5 | GND | ground (heat sink) |
6 | 2Y | driver 2 output |
7 | 2A | input 2 |
8 | VCC2 | output supply voltage |
9 | 3,4EN | enable (drivers 3 and 4) |
10 | 3A | input 3 |
11 | 3Y | driver 3 output |
12 | GND | ground (heat sink) |
13 | GND | ground (heat sink) |
14 | 4Y | driver 4 output |
15 | 4A | input 4 |
16 | VCC1 | logic supply voltage |
Specifications
(typical values under recommended operating conditions, unless specified)Parameter | Value | Unit |
---|
Supply voltage | 4.5 (min) 36 (max) | V |
Maximum output current per driver | 1 | A |
Notes
- When an EN line is low, the corresponding outputs assume a high-impedance off state.
Note: Data is maintained by an independent source and accuracy is not guaranteed. Check with the manufacturer's datasheet for up-to-date information.